Product brand: Zhihao
Product application:
Product introduction:
The axle press is a kind of axle press that can effectively improve production efficiency, enhance equipment safety performance, and reduce the injury caused by material splashing in the production process.
The body of the washing machine drum shaft pressing machine is composed of a horizontal frame and a vertical frame. The vertical frame is provided with a platform. The platform is provided with a first power device connected to the controller. The lifting rod of the first power device is connected to the pressure head. The horizontal frame is provided with a main shaft. The main shaft is located at one end below the horizontal frame, connected to the second power device through a reducer. The other end of the main shaft is connected to the rotary table. The upper surface of the rotary table is provided with evenly distributed support cylinders, The lower surface of the rotary table is provided with positioning blocks staggered with the support cylinder, and the outer edge of the rotary table is provided with clamping slots corresponding to the positioning blocks. One end of the rotary table near the vertical frame is connected with the support assembly, and one side of the rotary table is connected with the positioning assembly. It can quickly disassemble the plastic inner cylinder and metal inner cylinder shaft of the washing machine drum, improve the disassembly efficiency of the washing machine drum, and reduce the labor intensity.
Technical parameters:
|
Ｍodel
|
ZHHB-YZJ-6
|
|
size
|
1600*1180*2400mm
|
|
Diameter of rotary table
|
1180mm
|
|
Driving power
|
3kw
|
|
Reducer
|
230AD-6
|
|
Hydraulic station
|
7.5kw
|
|
Cylinder
|
HODA 125x250-50
|
|
Limit switch
|
2个
|
|
Control system
|
Mitsubishi PLC Schneider Electric
|
|
rhythm
|
20second
|
Product advantages:
① it is convenient to fix the inner barrel of the washing machine, improve the stability when pressing the shaft, and facilitate the collection of the shaft.
② it is convenient to fix the guide cylinder through the use of the fixing seat, collect the shaft ejected from the inner tub of the washing machine through the use of the placing box, and fix the inner tub of the washing machine through the use of the splint.
③ the platform is equipped with support bearings to make it run smoothly. The rotation angle of the platform is accurate, and the blanking size is neat and uniform.
④ electronic control system, high rotation accuracy and small error will not cause long-time operation leading to large stamping position deviation.
⑤ six station rotary pressing is adopted, which is faster than the traditional single station pressing tooling, saving time, labor and cost.
