Introduction:
The Cleaning Water Tank Is Also Known As The Sink And Float Material Sorting Water Tank. It Is Used To Clean The Pieces And Blocks Of Plastic After Plastic Crushing. It Can Separate The Sink And Float Debris, And Clean The Sediment And Paper Debris In The Plastic Materials. This Machine Is Simple In Operation, Long In Service Life And Convenient In Maintenance. The Bottom Of The Machine Is Equipped With A Sinking Material Cleaning Screw, And The Upper End Of The Machine Is Equipped With A Floating Material Cleaning Push Cylinder. It Is A Necessary Equipment For Mixing, Sorting And Cleaning Of Multi-Material Materials. It Can Sort Materials Thoroughly, Have Obvious Cleaning Effect, And Have A Wide Range Of Applications. Common Plastics Can Be Used. A Screw Feeder (Commonly Known As Jiaolong) Can Be Installed At The Bottom According To Requirements To Facilitate The Rapid Separation Of Sinking And Floating Materials. Especially For Two Kinds Of Plastics With Similar Density, The Separation Effect Is Better. For Example, Pet / Pp / Pc / Pvc / Abs / Ps (With A Salinity Of About 18 Degrees) Square Water Tank Replaces The Original Pool Built Of Cement. The Process Is Simple, And It Is Easy To Clean The Sediment And Other Debris At The Bottom. It Is Economical And Practical This Water Tank Is Now Widely Used In Abs, Ps Separation, And Pet Bottle Recycling And Cleaning Processes. Because The Water Tank Is Large And The Water Is Deep, The Separation Of Pet Bottle Cap And Bottle Body Is More Thorough, Which Can Achieve The Effect That Ordinary Water Tanks Can Not Achieve. In The Process Of Cleaning And Separation, The Sink And Float Material Tank Is Fed By Physical Friction Screw Or Appropriately Added With Washing Powder Or Other Cleaning Agents To Achieve Better Cleaning Effect.
Features:
1. Easy Operation, Electric Control Platform Operation, Time-Saving And Labor-Saving, Can Be Operated Alone Or Together With Other Machines;
2. The Scientific Design Enables The Floating Plastic To Be Fully Cleaned In The Cleaning Water Tank, And The Impurities Such As Sediment, Dirt And Metal Can Be Thoroughly Cleaned;
3. Energy Saving And Environmental Protection. All Motors Are Energy-Saving, And Water Resources Are Recycled, Making The Production Cost Lower;
Working Principle:
The Materials Are Put Into The Front End Of The Rinsing Water Tank, The Rinsing Paddle Rotates, And The Animal Materials Are Rinsed And Advanced. During The Rinsing Process, The Dirt And Impurities On The Materials Precipitate Downward. After Rinsing By Several Rinsing Dials, The Materials Reach The End Of The Water Tank, And Then Are Pulled Out Of The Water Tank By The Discharge Fork.
