It is believed that customers who use zhihao automatic grinding machine will feel that production is much easier than before, not only saving labor, high work efficiency, but also greatly improving output and increasing profits.

Have you done a good job in the daily maintenance of the grinding machine while bringing you benefits? if you only use it without paying attention to maintenance, the machine with good quality will be damaged quickly. if you want the grinder to work for you for a long time, you must do the following:
① it is necessary to determine whether the voltage (380v) is normal before starting up and using;
② before use, ensure that there is no material in the main machine to prevent the motor from starting under load and burning out the motor;
③ the main bearing in the motor should be lubricated and maintained every three months.
④ before shutdown, continue to idle the machine for 3 minutes when there is no material in the feed hopper of the machine, and ensure that there is no material in the machine until the vibrating screen is not discharging. it is considered that the material has been produced clean. there will be no load startup when the machine is started the next day, which will directly burn the motor
⑤ when using the machine, it is necessary to prevent the machine from losing balance, so as to prevent the machine from vibrating;
The feeding system can feed automatically, and it can be set manually, but it should not be adjusted too fast. too fast feeding will lead to current rise, material blocking in the machine, abnormal dust removal, and abnormal operation of the material extractor;
if the material contains iron and other metals, strong magnetism can be added at the feed inlet to ensure the normal operation of the equipment.